Materials

Plastoseal® Werkstoffe
MaterialDesignationColourHardnessHardnessTemp. °CTemp. °CTemp. °CTemp. °CPressureSliding speedFDA/Download
GroupsStandardShore A
± 2
Shore D
± 3
min.max.water/
steam
short
hot air
max.
bar *
max.
m/sec. *
KTW
POLYURETHANE H-PU (U2) red 95 ±2 48 ±3 -20 +115     400 0,5 - 5 FDA datasheet
H-PU (U2) 55D yellow   55 ±3 -20 +115     400 0,5 - 5   datasheet
PU93 green 94 ±2 47 ±3 -30 +110     400 0,5 - 5   datasheet
C-HPU red 96 ±2 50 ±3 -37 +110     400 0,5 - 5 FDA datasheet
C-HPU KTW nature 96 ±2 48 ±3 -37 +110     400 0,5 - 5 FDA/KTW datasheet
C-HPU 57D yellow   57 ±3 -30 +110     400 0,5 - 10   datasheet
C-HPU 72D black   70 ±3 -20 +110     400 0,5 - 10   datasheet
LT-PU+ blue 96 ±2 50 ±3 -55 +110     400 0,5 - 5   datasheet
SL-PU darkgrey 96 ±2 48 ±3 -37 +110     400 0,7 - 6   datasheet
H-PU Sonder H-PU93A Mokka-MDI turquois 93 ±2 47 ±2 -30 +130     400 0,5 - 5   datasheet
H-PU57DG Mokka-MDI darkgrey   57 ±3 -30 +130     400 0,5 - 7   datasheet
HT-PU orange 96 ±2 50 ±3 -35 +135     400 0,5 - 5   datasheet
ELASTOMERE (Gummiwerkstoffe) NBR black 85 ±5   -30 +110     160 0,5 - 10   datasheet
NBR 73 black 75 ±5   -30 +90     120 0,5 - 10   datasheet
NBR white white 85 ±5   -30 +110     160 0,5 - 10   datasheet
H-NBR green 85 ±5   -20 +150 +120 +180 160 0,5 - 10   datasheet
H-NBR 90A black 90 ±5   -20 +150 +120 +180 200 0,5 - 10   datasheet
H-NBR ED black 87 ±5   -15 +150 +110 +180 160 0,5 - 10   datasheet
T-NBR black 80 ±5   -50 +110     160 0,5 - 10   datasheet
EPDM peroxyd black 85 ±5   -45 +130 +130 +180 160 0,5 - 10   datasheet
EPDM white FDA white 82 ±5   -45 +130 +130 +150 160 0,5 - 10 FDA datasheet
EPDM KTW/FDA black 81 ±5   -40 +130 +130 +150 160 0,5 - 10 FDA/KTW datasheet
SILIKON - MVQ blue 85 ±5   -60 +200   +300 160 0,5 - 5   datasheet
SILIKON nature FDA - MVQ translucent 85 ±5   -60 +200 +110 +300 160 0,5 - 5 FDA datasheet
SILIKON white FDA - MVQ white 85 ±5   -60 +200 +110 +300 160 0,5 - 5 FDA datasheet
FPM (VITON ®) brown 82 ±5   -20 +220   +300 160 0,5 - 15   datasheet
FPM black (VITON ®) black 85 ±5   -20 +210   +280 160 0,5 - 20   datasheet
FPM FDA (VITON ®) brown 80 ±5   -20 +220   +300 160 0,5 - 20 FDA datasheet
FPM ED (VITON ®) black 85 ±5   -20 +220   +300 160 0,5 - 20   datasheet
TFE/P (AFLAS ®) black 85 ±5   -5 +200 +170 +230 160 0,5 - 10   datasheet
AFLAS ® 90A black 90 ±5   -5 +200 +170 +230 160 0,5 - 10   datasheet
PTFE  Werkstoffe PTFE virgin 100% Polytetrafluorethylen white   55 ±3 -200 +260     160 0,4 - 4 FDA datasheet
PTFE 1 + 15% Glas/ 5% MoS2 grey   58 ±3 -200 +260     400 0,4 - 4   datasheet
PTFE 2 + 40% Bronce brown   60 ±3 -200 +260     400 0,4 - 4   datasheet
PTFE D05 + 1% Pigmente turquois   57 ±3 -200 +260     200 0,4 - 4   datasheet
PTFE D05 GF + 1% Pigmente / 15% Glas turquois   60 ±3 -200 +260     400 0,4 - 4   datasheet
PTFE D08 GF Glas + Pigmente orange   62 ±3 -200 +260     200 0,4 - 4   datasheet
PTFE D46 + 46% Bronce / Pigmente bronce blue   63 ±3 -200 +260     400 0,4 - 4   datasheet
PTFE Carbon + 25% Carbon black   67 ±3 -200 +260     350 0,4 - 4   datasheet
PTFE E-CARBON + Carbon / Additive black   60 ±3 -200 +260     400 0,4 - 4   datasheet
PTFE GRAPHITE + 15% Graphite darkgrey   60 ±3 -200 +260     300 0,4 - 4   datasheet
PTFE EKONOL® + 10% Ekonol creme   56 ±3 -200 +260     300 0,4 - 4   datasheet
PTFE 25% GF + 25% Glasfiber grey/white   60 ±3 -200 +260     400 0,4 - 4 FDA datasheet
PTFE TFM FDA white   57 ±3 -200 +260     300 0,4 - 4 FDA datasheet
PTFE cond. FDA 1% conductive additiv black   57 ±3 -200 +260     300 0,4 - 4 FDA datasheet
PTFE PEEK +10% Peek creme   60 ±3 -200 +260     400 0,4 - 4 FDA datasheet
PLASTOMERE - STANDARD POM white/black   82 ±3 -45 +100     400 0,4 - 4 FDA datasheet
PA nature   77 ±3 -40 +110     400 0,4 - 4   datasheet
PE3 (HD) nature   63 ±3 -50 +80     350 0,4 - 4   datasheet
UHMW-PE (PE10) nature / green   61 ±3 -200 +80     300 0,4 - 4 FDA datasheet
PLASTOMERE - Thermoplaste SPEZIAL PA6.6 - PA12 - PVC - PP - PPE - PVDF - PCTFE - PEI - PI - PEEK - PET - PSU - PAI - PC - PMMA - etc.
order as necessary Datasheets
HGW        Based - PHENOLHARZ Datasheets on request
Based - GLASFASER
Based - GLASGEWEBE
Based - KOHLEFASER
METALLE ALU - ALF37 Datasheets on request
ROTGUSS - RG7
MESSING - Ms58
SINTERBRONCE
NIRO - 1.4301/1.4571

 

Special paint in the POLYURETHANE sector - Special RUBBER MATERIALS – Special mixtures in the PTFE sector - Special materials in the PLASTOMERS//THERMOPLASTS sector on REQUEST.

The specified values are test results of test bodies and cannot be transferred to finished products (seals, turning or milling components). PLASTOSEAL is not liable for products manufactured from these materials.

* depends on application and geometry